Thicker coil spring isolators replace the factory isolators installed on top of the stock coil springs. By retaining the factory springs you’re assured of factory ride quality. Compression travel is controlled via new dampeners; our unique closed-cell foam units are supplied for both front and rear axles. Replacement shocks are not required, although optional Superide shocks improve control, and provide off-roaders an additional 4” of extension travel.

Generally, caster angle is adequate at this modest lift height, although if caster is “light”, optional alignment cams are available. Other options for increasing caster are longer, fixed-length front / lower axle-to-frame links, or high-clearance Rockrunner Links. If replacement lower links are used, alignment cams are not needed.

Check our Options Listing that includes Rockrunner swivel link arms and sway bar quick disconnects (for maximum articulation), O.E. Replacemnt Steering Stabilizers, High Clearance Single Steering Stabilizers and High Clearance Dual Steering Stabilizers, each design is available with either Superlift Superide cylinders or Superide SS cylinders by Bilstein.