8" Lift System

Run 35" tires without trimming; 37" with minor trimming. Vehicle shown with 8" Lift and 35x12.50 tires on 20" wheels. Front lift via replacement premium gas struts in combination with small spacers. Other key components include replacement knuckles with one-piece welded crossmembers, differential belly pan, sway bar relocation brackets, and kicker braces. System is compatible with General Motors’ Electronic Stability Control . Rear lift consist of five inch blocks and full-length add-a-leafs. Superide 5" replacement rear springs used with 2" blocks, are offered. - 20" MINIMUM WHEEL DIAMETER ONLY - CAN NOT RUN STOCK WHEEL

Product Details			Quantity

K922	Master Pack, 2008 GM 1500 8" Pickup

Optional Components

Application Notes

Minor cutting and / or welding required.
Can run 18" or 20" stock wheels with oversize tires. 17" stock wheel & tire can be used as spare only. Aftermarket wheels require specific backspacing; min. 5.5"/ max 6".

Installation Instructions

Main Features

Utilizes new premium gas strut bodies and short strut spacers.
High clearance, one-piece crossmembers, and all other load bearing bracketry, is laser cut from .25½ thick plate steel. No differential trimming required, plus the factory front drive shaft is retained.
Belly pan connects and strengthens the front / rear crossmembers while protecting the differential.
Kicker braces further increase overall rigidity.

Tire / Wheel Recommendations

20" MINUMUM WHEEL DIAMETER - CAN NOT RUN STOCK WHEEL

2012 - 2013 Chevy/GMC 1/2-ton Pickup 4WD w/o Factory Electronic Shocks

Select a lift height for more information...