|
Slip Yoke Eliminator Kit for Jeep TJ, YJ, and XJ
|
Slip Yoke Eliminator Kit for use on NP-231 transfer case Part No. 5080 for Jeep TJ, YJ, XJ This heavy-duty transfer case tail-housing conversion allows the use of a bolt-on rear driveshaft yoke in place of the weaker slip yoke design found on most Wranglers (YJ and TJ) and Cherokees. The kit does not fit NP-247 or NP-207 transfer cases. Our new, shorter transfer case tail housing assembly permits the use of a longer rear driveshaft to decrease driveline angle and the associated vibration.
|
More Information
Application Guide
A larger diameter 32-spline output shaft, the use of needle bearings instead of journal bushings, and a pressure-sealed bearing housing make this kit a no-brainer for the serious off-roader. When used with a 3" to 4" suspension lift, the lift's transfer case lowering hardware can be removed resulting in increased ground clearance. Kit includes an output yoke for a 1310 series U-joint. Driveline combinations vary, requiring different shaft lengths and pinion U-joint sizes. With this in mind, we recommend that you purchase the required new rear driveshaft locally, or contact one of the nationally known Jeep driveline specialists.
|
