1-800-551-4955

1" Jeep Suspension Lift Kit

  • SKU: K708
  • $549.95
0
  • Superide leaf springs provide superior durability and ride quality
  • Urethane spring eye bushings, except for 1955-75 models, which use factory style steel encased rubber bushings
  • Front / rear U-bolt kits included
  • Superide shocks included
  • Lifetime Warranty
  • Satisfaction Guarantee

For 1.5" lift: 31" tire on wheel with standard back spacing. For 2.5" lift: 32" tire on wheel with standard back spacing.

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

The Superlift 1" lift for the 1946-63 Jeep CJ includes front and rear Superide replacement leaf springs, new frame to axle U-bolts with heavy-duty flat washers and nuts, poly bushings for the leaf springs and Superlift Superide shocks.

Superlift Superide leaf springs feature tapered leaf ends with Teflon inserts between the leafs for reduced friction and bolt-style spring clips.

Quantity two, part number 5235 Shackle Kit, are required if the vehicle is still equipped with the factory 'C' style shackles. This improved design, the same basic design found on later model Jeeps, sandwiches the spring eye between two individual shackle plates made of 3/16" thick steel. Includes Grade-8 shackle bolts with self-locking hardware.

Year Range Make Model Drivetrain Engine Cab
1946-1963 Jeep CJ2A / CJ3A / CJ3B 4WD