- New coils springs offer improved ride and handling
- Adjustable alignment bushings correct camber angle
- Lifetime Warranty
- Satisfaction Guarantee
31 x 10.50 on a standard offset wheel
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.
Actual dimensions of a given tire size can vary considerably from one brand to another.
Manufacturers’ wheel offset and backspacing measurement points are not always consistent.
Backspacing greatly impacts tire-to-fender clearance when turning.
Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.
Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Check vehicle to verify that factory alignment bushings in upper ball joints are zero degree. If they are not, there may not be enough adjustment for proper alignment and 1-2" coils should not be used.
This moderate lift is used to level-up your vehicle, and/or to offset the weight of a winch / bumper or snow plow. Lift is achieved with new pre-set coil springs that provide the best possible ride quality. The net lift height attained depends on what load-rated springs your vehicle is factory-equipped with and their condition.
Negative camber is corrected by replacing the factory camber bushings, located on top of the upper ball joints. Alignment shops offer replacement camber bushings in set increments of correction up to 2-degrees. The lift kit includes a pair of Superlift adjustable camber bushings that provide an increased correction range. Generally, this increased range allows you to correct camber and also improve caster angle.
Front/rear Superide shock absorbers are also included. If rear lift is also desired, refer to Block Kits or Add-A-Leafs.
||B-3000 / B-4000 Pickup