- Replacement upper control arms relieve ball joint angle
- Durable Urethane control arms bushings included
- Re-indexed torsion bar keys provide front lift
- Rear lift via add-a-leafs
- Superlift Superide shock absorbers included
- Lifetime Warranty
- Satisfaction Guarantee
31 x 10.50 on a standard backspacing wheel
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.
Actual dimensions of a given tire size can vary considerably from one brand to another.
Manufacturers’ wheel offset and backspacing measurement points are not always consistent.
Backspacing greatly impacts tire-to-fender clearance when turning.
Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.
Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Special puller tool is recommended to load / unload torsion bars.
Front lift is achieved with new torsion bar keys. The keys mate to the rear ends of the bars, housed in the torsion bar crossmember. As the keys are loaded, they apply torsional load to the bars which lift the vehicle. The new Superlift keys are indexed differently to increase bar rotation, which provides lift without increasing load, so ride quality does not suffer.
Superlift replacement tubular upper control arms make realignment possible, and restore proper suspension extension travel. Otherwise, the upper control arms would continuously "top out", creating a harsh ride and accelerated ball joint wear. Constructed of .219" wall thickness DOM tubing and .25" steel plate, the arms have proven to be almost indestructible.
Rear lift is via add-a-leafs, plus 1" lift shackles.
Includes front/rear Superide shocks.
An optional replacement steering stabilizer is also available.
||S-10 Blazer / S-15 Jimmy ZR2