- Pre-set replacement front coil springs provide lift
- Adjustable Camber bushings correct alignment.
- Superide shock absorbers included
- Lifetime Warranty
- Satisfaction Guarantee
31 x 10.50
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.
Actual dimensions of a given tire size can vary considerably from one brand to another.
Manufacturers’ wheel offset and backspacing measurement points are not always consistent.
Backspacing greatly impacts tire-to-fender clearance when turning.
Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.
Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Check vehicle to verify that factory alignment bushings in upper ball joints are zero degree. If they are not, there may not be enough adjustment for proper alignment and 1-2" coils should not be used.
This moderate lift is used to level-up your vehicle, and / or to offset the weight of a winch / bumper or snow plow. Lift is achieved with new progressive rate coil springs that provide the best possible ride quality. The net lift height you achieve depends on what load-rated springs your vehicle is factory-equipped with and their condition.
Negative camber is corrected by replacing the factory camber bushings, located on top of the upper ball joints. Most replacement camber bushings are offered in set increments of correction. This lift kit includes Superlift adjustable camber bushings that afford an increased correction range. Generally, this increased range allows the alignment shop to properly set camber, plus also improve caster angle.
The lift kit includes 2 front and 2 rear Superide shocks. If the vehicle is factory-equipped with auxiliary (dual) front shocks, also order quantity 2 part number 85270 Superide shocks.