- Steel spacer construction will not deteriorate or decrease ride height over time
- Allows the use of plus-size wheels / tires
- Easy installation and removal
- Ideal for restoring height lost from heavy front bumper / winch combos
- Enhances appearance by leveling the stance of the vehicle
- 10.9 grade metric hardware included when needed
- Protective powdercoat finish
- Lifetime Warranty
- Satisfaction Guarantee
Recommended maximum tire diameter of 33"
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.
Actual dimensions of a given tire size can vary considerably from one brand to another.
Manufacturers wheel offset and backspacing measurement points are not always consistent.
Backspacing greatly impacts tire-to-fender clearance when turning.
Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.
Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Dually applications may require different u-bolts.
Most Super Duty vehicles have a 1.91" tall factory block (measured at blocks rear facing end) and do NOT have top-mounted overload springs; block kit #9016 fits these vehicles. If equipped with 1.91" factory block AND top-mount overloads, OR 3.71" factory block WITHOUT top-mount overloads: either order a block kit # 9116, or set of longer U-bolts (qty. one #11654). If equipped with 3.71" factory block AND top-mount overloads: either order block kit # 9117, or set of longer U-bolts (qty. one #11664).
The 2.5" leveling lift for the coil sprung Super Duty uses a front coil spacer to guarantee consistent lift height and maintain factory ride quality. The kit is packaged complete with Superlift Superide or Superide SS shocks by Bilstein.
|Year Range ||Make ||Model ||Drivetrain ||Engine ||Cab |
|2005-2014 ||Ford ||F-250 / F-350 Pickup ||4WD ||Diesel || |
|2005-2014 ||Ford ||F-250 / F-350 Pickup ||4WD ||Gas || |