Select Your Vehicle


 

Shop now, pay later with Learn more

6 inch Lift Kit - 2007-2018 Toyota Tundra 4WD

See Answered Questions
In stock
SKU
K962
$1,349.95
What is this?
View complete details below
  • This is a complete 6 inch system for thr 2007-2018 Toyota Tundra 4WD
  • Does not fit Tundra Models – TRD Pro, Rock Warrior, Or XSP-X Models
  • Will NOT work on 2016 TRD Pro (Bilstein Piggyback Strut) Models
  • Cannot run the factory 18” wheel
  • Aftermarket 18” wheels require at 5” or less back spacing.
What does it include?
You should also buy below
  • This kit includes front steering knuckles, HD Tie Rod ends, crossmembers, skid pan, sway bar correction, rear blocks, and rear shocks.
  • Limited Lifetime Warranty
Verify Fitment Table

Warranty & Installation Info

Limited Lifetime Warranty

View Details

Installation time: 8 to 9 Hours

View Notes

6 inch Lift Kit -

2007-2018 Toyota Tundra 4WD excluding TRD Pro, Rock Warrior, and/or XSP-X Models

 

Superlift’s 6-inch lift kits for the 2007- 2018 Toyota Tundra are a great way to add height to your overall Tundra’s appearance. Superlift’s Suspension Lift Kits have a strong, modern die-formed design constructed of solid steel giving your truck a strong suspension. Superlift Suspension intentionally over-builds our suspension kits to be the best. Our uniquely engineered design adds strength and durability and has bonus features that others do not offer. The 6-inch lift kit for the Toyota Tundra is a complete replacement knuckle kit.

This kit includes front knuckles, front strut spacers, lower control arm cross-members, a rear block kit, and rear shocks.  All required parts are included to make sure your Tundra handles and performs in all conditions.

Features:

  • Adds clearance up to 35 diameter tires
  • Ductile Iron Steering Knuckles
  • Full “Belly” Skid Plate.
  • HD Outer Tie Rod Ends
  • Rear lift is achieved with Block & U-bolt Kit
  • Levels the truck front to rear
  • Comes complete with rear Superlift shocks
  • Backed by our Limited Lifetime Warranty

 

 

Benefits:

  • Retains OEM caster and camber alignment specifications
  • No excessive ball joint or steering components
  • CV axle angles are in the stock parameters
  • Maintains stock like ride quality and handling

 

 

Technical Notes:

  • Does not fit Tundra Models – TRD Pro, Rock Warrior, Or XSP-X Models
  • Will NOT work on 2016 TRD Pro (Bilstein Piggyback Strut) Models
  • Cutting and Drilling is required
  • Cannot run the factory 18” wheel
  • Aftermarket 18” wheels require at 5” or less back spacing.
  • See Recommend tire and wheel combinations
  • Do Not combine with any other suspension lift
More Information
Shocks Superide Shocks
Years Drive Make Model
Tire Wheel Backspacing Offset

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes

  • Installation time: 8 to 9 Hours
  • Difficulty level: 4 of 5
SEARCH for an installer